For Multi-Pad Lifters

Do not need to rely on external power, outward control or any complex ccessories. The machine create its’ own vacuum function which is used for factory, warehouse as well as anything need to be lifted, moved, storage indoor or outdoor.

VL-2-30B / VL-2-80B/ VL-2-150
VL-4-200 / VL-8-300

.Increase Productivity
.High safety for user
.Elminates Equipment Damage
.Elminates Material Damage
.Improve Storage Utilization
.Simple On/Off Cycle is Quick and Reliable Upward/Downward Movement Controls Vacuum Pickup and








VL-2-80B VL-8-300
VL-2-80B VL-8-300


Model No. Capacity No. of pads OD of pads Beam Length Net Weight
VL-8-300 3000 8 480 6000 1000
VL-4-200 2000 4 480 6000 670
VL-2-150 1500 2 480 2000 200
VL-1-200A 2000 1 500x1000 x 270
VL-2-80B 1000 2 480 2000 200
VL-2-30B 300 2 350 2000 70
VL-80A 800 1 480 x 93
VL-30A 300 1 355 x 35

.Use crane to hook the vacuum tank. (Main body of vacuum lifter)
.Please confirm the position of vacuum lifter. The vacuum pad should right on the top of the plate and cover
 plate. Then control of the crane machine to let chain goes down to the Main body of vacuum lifter position.
 (Chain slack).
.Control the crane machine to lift up the chain, and confirm if the plate be sucked.
.Lift up the crane let the vacuum lifter to lift up the plate a little bit to check the sucking condition.
.When arrive the right position, and confirm the position of the plate you are going to put down move down to
 slack the crane's chain.
.Pull up the chain once again to let the vacuum lifter to release the plate.
.Let vacuum lifter goes down to loose the chain till to suck next plate.

Multi-Pad Lifters

Vacuum lifter hook up, open the value, there is not vacuum inside.

Multi-Pad Lifters Multi-Pad Lifters

Piston inside of the vacuum tank, value stop to prepare the vacuum cycling.

Pads support the piston, to lift up according to the piston's movement, and there will generate the vacuum on the button of piston and pads.

Multi-Pad Lifters

.Handle from the thickness portion OR center of metal plate.
.Look across to the 2 inch deflection column.
.Confirm the Max and Min. size of plate.
.Check the distance of pads if as the suggestion, the same principle apply to all vacuum lifter.